This product belongs to Switch Pro wireless (Bluetooth) control handle, with TURBO function, supports motor double vibration, is connected with Switch host, and is also compatible with PC host (XP system or above), can be applied to ARMS powerful boxing, Mario racing 8 The legend of Zelda, and the control of various games, make you feel the immersive feeling in the game.

Line length 180cm

Feature of product:
1) Compatible with all the functions of the buttons and motors of the original Switch, (Sensor function is available);
2) Provide 4 red LED indication functions;
3) Provide 16 button function input keys to support TURBO function;
4) Built-in dual motor, 256-level precision 3D joystick;
5) The button responds sensitively and the control is handy;
6) Compatible with PC host (supports X_input and D_input modes).

product description:

1, function description

Through the Bluetooth, the handle is connected to the switch host; Connected to the PC host through the USB cable in the off state, the X_input and D_input modes are implemented.

2, handle operation

For the first time, press and hold the HOME button for 3 seconds to boot into the pairing. LED1-4 flashes quickly, the pairing is successful, and the corresponding channel light assigned by the Switch host is on. Connect again and press the HOME button to boot back into the connection. LED1-4 flashes slowly, the pairing is successful, and the corresponding channel light assigned by the Switch host is on.

3, the button composition

4, motor function

Handle with dual motor function

5, charging

When the handle is turned off, when the handle is inserted into the adapter, LED1-4 blinks, and when it is full, LED1-4 goes out. When the handle is connected to the USB, the corresponding channel light flashes slowly when it is inserted into the USB port.

6, low electricity alarm

When the handle battery voltage is lower than 3.6V (according to the battery characteristic principle), the corresponding channel light flashes slowly, indicating that the handle is low and needs to be charged.

7, shut down

When the handle is turned on, press and hold the HOME button for 5 seconds to enter the shutdown; When the handle is online, it will automatically shut down without any button operation within 10 minutes.

8, on the upgrade

The handle can be driven directly from the USB driver.

9, reset function

When the handle is abnormal, it can be reset by pressing the reset button on the back of the handle.

10, accept the distance

The handle can be received at a distance of 8-10M, depending on the environment.

11, about PC wired mode

Press and hold the “+” button and connect to the PC with the USB cable. The LED1 and LED3 flash and stop at the second light, indicating that the Dinput mode has been entered. Press and hold the HOME button for 3 seconds to switch to The Xinput mode changes to the third light.

Basic parameters

Battery built-in polymer lithium battery

Battery capacity 500mAh

Battery life 15-20 hours (games vary)

Charging time 2.5 hours

Charging voltage USB DC5V

Charging current <350mA

Charging interface TYPE-C