[Product name]: car air pump

[Product size]: about 14.5*6*20.5cm

[Product material]: ABS

[Product weight]: gross weight (approximately) 800g

[Power cord length]: about 300 cm, tracheal length is about 50 cm

【Output power】: 120 (W)

[Rated voltage]: DC12 (V)

【Illumination Light】: LED

【Features】:

1. This machine is suitable for 12V car tires,
2. It is also suitable for motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys and so on.
3. When working on the highway, in the field or in the morning, if the tires suddenly leak or get an injection, it can be used as an emergency.
4. Keeping the correct tire pressure on the car tires can ensure driving safety and save gasoline. It can be used with the car just in case, and the magical effects are endless.
5. Equipped with a complete set of inflatable nozzles, which can be used to inflate tires, inflatable boats, air cushions, inflatable toys, balls and many other purposes.

【Instructions for use】:

1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has circulated. Continue to tighten the air nozzle. At this time, the air will no longer leak out.
2. Insert into the DC12V cigarette lighter
3. When inflating, the indicator pointer rises with the saturation of the tire. When the pointer reaches the appropriate tire pressure (generally, the tire pressure of a car tire is 223kpa=35PSI), take out the plug and the air nozzle to complete the work.
4. Please use the professional ball needle and plastic nozzle of this machine to connect with the air nozzle to inflate the ball and other air-demanding equipment.

【Precautions】:
1. It cannot be used to inflate the tires of large and overweight vehicles, such as trucks, large trucks, container trucks, etc.;
2. Please start the car engine to increase the power when using it, without consuming the car battery power;
3. The machine is limited to DC (DC12V) power supply, and household high-voltage AC (AC220V) power supply is not allowed;
4. When inflating, please stop for 10 minutes to cool down after 10 minutes of continuous work to prevent damage to the air pump and accessories and extend the life of the motor. When the inflatable boat is inflated, it can work continuously for 30 minutes;
5. Normal tires can reach 30PSI normal tire pressure in about 3-5 minutes when inflated, while larger tires will take a little longer; if the indicator of the meter rises to 50-100PSI when inflation starts, it means that the air is blocked. , Air does not enter the tires. At this time, you need to immediately unplug the air nozzle connector and re-operate, otherwise the motor and the instrument are easily damaged.
6. Don’t leave the body when using it, pay attention to the tire pressure at any time, and don’t oversaturate it;
7. After the machine is used, the gas nozzle wrench must be straightened to avoid fatigue of the rubber elasticity inside;
8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);
9. The machine should avoid dampness, heavy falls and sand and mud intrusion, and prevent children from playing with it to avoid damage;
10. The pressure required for each type of tire is different, please refer to the label on the side of the car tire