I really like the features of this wall outlet adapter, but it has one problem. Like most other "over the outlet" multiple outlet adapters, this has a screw in the middle to attach it, so you remove the screw holding on the existing cover and install this one. Normally you remove the screw AND cover and this would replace it. Unfortunately that doesn't work for this one since the outlet is designed to stick out from the wall and this is just a rectangular box that mounts flat on the outlet. Usually there's a rim on the back of the adapter so that when you screw it in, it tightens up to the wall. In this case, it only tightens to the plug and just wobbles with a gap all the way around it where you can still see into the electrical box. I went and pulled it off and reinstalled the cover and installed this over it, but it still wobbles a bit on the mount. Beyond that initial annoyance, the features of the plug are pretty great, with outlets on either side so that our collection of always plugged in chargers can run along the wall. It'd be nice to have the USB outlets on the side too for the same reason, but facing out is convenient if you're only putting the cables there temporarily. As is the socket replacement plugs on the front for using the vacuum cleaner, etc. The shelf attaches to either side, so it will work even if your plugs are upside down.

Love it!

screw to short to hold it in the wall

Is a little wobbly

I purchased one of these at Christmas that was quality workmanship, this one was ok.

I will soon be ordering one to be used as a gift. No other comments needed.

Took me a few minutes to figure it out

They are Christmas presents who knows how they will do!!

I do not know if they are the plugs in my house but it is loose when connecting it

I wish I had known you couldn't turn off the night light on this product. It is very irritating at night. I tried masking tape and black marker and it helps.